Skandika Fitness JUPITER Instructions De Montage Et Mode D'emploi page 37

8. WATT
In the setting mode, the preset Watt value 120 flashes on the screen. This value can be determi-
ned with the keys UP/DOWN in the range of 10 to 350. Press the key MODE to confirm.
9. BODY FAT
9.1 To measure the body fat press the key BODY FAT in STOP mode.
9.2 The selected user (U1~U4) flashes for 2 seconds. Then the measurement begins.
9.3 During the measuring procedure, both the hands must be on the handles. The display "--" "--
"appears for 8 seconds till the computer has finished the measurement.
9.4 On the LCD-screen for 30 seconds the tag symbol BODY FAT flashes, the BODY FAT is
displayed in percentage and BMI.
10. RECOVERY PHASE
After the completion of training unit hold the handle bars and press the key RECOVERY PHASE".
Only the function "TIME" is displayed and the countdown 00:60 auf 00:00 starts.
Pulse normalization of F1, F2....till F6 is displayed. F1 is the best, F6 the worst. The heart fre-
quency is improved by regular training.
Press the key RECOVERY PHASE again to return to the main display.
NOTES
1. For this computer a 9V, 500mA adapter is required.
2. If the pedals are not moved for 4 minutes, the computer goes in the power saving mode. The
settings and training data are saved till the continuation of training.
3. If the computer does not function properly, switch off the adapter and then again switch it on.
COMPUTER | USE
37