Skandika Fitness JUPITER Instructions De Montage Et Mode D'emploi page 29

ASSEMBLY INSTRUCTION MANUAL
Step 2:
Connecting/Attaching the grip-support (10)
Attention! Arrange for the assembling of screws as follows. First of all insert a spring washer (7) and
then a curved U-pane (6) to the two raised head -socket screw (9).
Then insert a spring washer (7) and a curved U-pane (6) to four raised head -socket screw (10). Slide
the protective cover (49) over the lower part of grip support (10).
Insert the connector/plug of the computer cable (29) to the plug of computer cable (30) of the main
frame (1).
Attention! The connecting plugs of the computer cable (29 and 30) are plugged into one another only
in one position and without any use of force.
Slide only the grip-support (10) in the given openings of the main frame (1). Fix the threaded holes of
the grip support (10) with the hole positions of the main frame (1).
With the six raised head -socket screw arranged by you (9) screw only the grip-support (10) with the
main frame (1).
Attention: Please note that the curved U-panes (6) fit to the surface of grip support (10) and cling com-
pletely.
29