Skandika Fitness JUPITER Instructions De Montage Et Mode D'emploi page 30

ASSEMBLY INSTRUCTION MANUAL
Step 3:
Attaching the handle bars (52L and 52R)
Slide the coverings (23L and 23R) via the axle on the grip support (10). Then firstly slide the shaft
washer (75), then the fitting handle bar on each side (52L and 52R) and the U-pane (60) via the axle
of grip support (10) in the following sequence.
Thereafter screw the handle bars (52L and 52R) tightly with the hexagon head screw (40).
30