Quinta Tb Boundary Microphone - Beyerdynamic QUINTA Guide De Démarrage Rapide

22
3.3

Quinta TB Boundary Microphone

Switching on
• The boundary microphone is switched on by pressing the microphone button
button will light up for a moment and the operating control LED
green.
When the connection to the Quinta CU control unit has been established, the microphone button
will illuminate white in the conference mode to display the ready for operation status and in the
microphone mode it will illuminate green.
• To activate the microphone in the conference mode or to allocate the microphone to a free channel
of the Quinta CU control unit, press the microphone button
operating mode, the microphone button
(request-to-speak mode). In the microphone mode the microphone of the Quinta TB is automatically
activated (microphone button
microphone button
Switching off
• If you press the microphone button
switched off.
• You can switch off all the active Quinta TB microphones within the range of the Quinta CU
control unit when you press the standby button
• Furthermore, the Quinta TB boundary microphones are switched off automatically, when they do not
receive a signal from the Quinta CU control unit for more than 3 minutes.
Operating modes
The different operating modes such as "Normal", "Push-To-Talk" or "Push-To-Mute" (available in the
microphone mode only) are adjusted with the Quinta Conference software for all microphones. The
standard operating mode is "Normal". Please refer also to the appropriate "Quinta Conference
Software" or "Quinta Web Server" manual.
Powering / operating time
• The boundary microphones have an integrated rechargeable battery allowing an operating time of
approx. 16 hours.
• As soon as the battery charge is too low for a satisfactory operation, the operating control LED
on the rear of the microphone will flash. The remaining time of operation is around 60 minutes.
• The charging state of the microphones can be displayed with the Quinta Conference software on a
PC connected to the Quinta CU control unit or via the integrated web server. Furthermore, it can
be displayed on an external media control system connected to the Quinta CU control unit.
• The Quinta TB boundary microphone can be powered via the external CA 2459 mains charger
adapter, which is connected to the DC socket
mains charger adapter is connected, the rechargeable battery of the boundary microphone is charged.
Charging
• Before using the Quinta TB boundary microphone for the first time, you have to recharge the
integrated rechargeable batteries. The maximum charging time is approx. 2 hours.
• For charging connect the CA 2459 mains charger adapter to the microphone and to a power socket.
If the microphone is switched on when recharging, the operating control LED
illuminate red for one time and then permanently green to indicate that the microphone is powered.
• When the microphone is switched off, the charging process is displayed by the operating control
LED as described in the following:
a) LED flashes slowly red . . . . . . . . . . . . . . Battery is charged, normal charging process
Quick Start Guide Quinta – How to Operate the System
will illuminate green (normal operating mode) or red
will illuminate green). In order to mute the microphone, press the
briefly once again (microphone button
for more than 2 seconds, the boundary microphone will be
briefly once again. Depending on the
will illuminate red).
of the control unit for more than 3 seconds.
on the rear of the microphone. While the CA 2459
. The microphone
on the rear will illuminate
will briefly