Utilization Prohibitions; Overload Indicator - Tractel dynafor LLX2 Serie Instructions D'emploi Et D'entretien

3.3 Utilization
3.4 Uninstallation

4 UTILIZATION PROHIBITIONS

It is prohibited:
• To use dynafor
GB
specific risk analysis.
• To modify the appliance housing by machining, drilling or any other process.
• To use dynafor
• To put the Dynafor in a arc weld electrical circuit.
• To disassemble or uncover the sensor or display unit.
• To use the appliance for operations other than those described in this manual.

5 OVERLOAD INDICATOR

In the event of overload, all stress on the sensor must be completely relieved and a check
made that the appliance returns to zero.
If the appliance shows a stress value, even though tension is not applied, then it has suffered
a permanent distortion. In this case, you must have the appliance serviced by the manufacturer
before continuing to use it.
LLX2 in a line for lifting people without having carried out a prior
beyond their maximum capacity.
DANGER
HI