Battery Operation; Interface - Adam ABK Serie Notice Utilisation

EN

8.0 BATTERY OPERATION

• The scales can be operated from the battery if desired. The
battery life can be up to 70 hours depending on the load cells and
how the backlight is used.
• A battery symbol is shown on the display which indicates the
current charge of the battery, 3 bars means fully charged. When
just the outline of the battery and no bars are visible the battery
needs to be re charged.
• To charge the battery, simply plug the adaptor into the mains
power, and also into the input connector on the rear of the
Indicator marked DC 12V. The scale does not need to be turned
on.
• The battery should be charged for 12 hours to reach full capacity.
• Near the display is an LED to indicate the status of battery
charging. When the scale is plugged into the mains power the
internal battery will be charged. If the LED is green the battery has
a full charge. If it is red the battery is nearly discharged and yellow
indicates the battery is being charged.
9.0 RS-232 INTERFACE
The ABK/AFK is supplied with a bi-directional RS-232 interface as standard.
The scale when connected to a printer or computer outputs the weight with
the selected weighing unit through the RS-232 interface.
Specifications:
RS-232 output of weighing data
ASCII code
9600 Baud (user selectable)
8 data bits
No Parity
© Adam Equipment Company 2015 13 3116611621RevA1-Feb15