Operation; Zeroing The Display; Taring - Adam ABK Serie Notice Utilisation

EN

6.0 OPERATION

ZEROING THE DISPLAY

6.1
• You can press the [Z/T] key at any time to set the display to zero.
This will usually be when the platform is empty. When the zero
point is obtained the display will show an indicator for zero.
• The scale has an automatic re-zeroing function to account for
minor drifting or accumulation of material on the platform.
However you may need to press the [Z/T] key to re zero the scale
if small amounts of weight are shown when the platform is empty.

TARING

6.2
• Zero the scale by pressing the [Z/T] key if necessary. The
"ZERO" indicator will be ON.
• Place a container on the platform and a value for its weight will be
displayed.
© Adam Equipment Company 2015 9 3116611621RevA1-Feb15