Key Descriptions - Adam ABK Serie Notice Utilisation

EN

4.0 KEY DESCRIPTIONS

[>Z/T<]
[PCS]
[Unit] 
© Adam Equipment Company 2015
Used to reset the display to zero.
Tares the scale. Used to deduct and store the weight
currently on the scale if it is not required as part of the
final weighing result.
A secondary function,
when setting up a value for the Parameters.
Selects parts counting. Used to set the sample
quantities while parts counting.
A secondary function
digit when setting a value for Parameters.
Selects the weighing unit to be displayed from those
which are enabled. See parameter S1 in section 7.4 in
the full manual.
A secondary function,  is to move the active/flashing
digit to the left when setting values for Parameters.
7
is of an "Enter" key used
is of incrementing the active
3116611621RevA1-Feb15