Accumulated Total; Percentage Weighing; Animal (Dynamic) Weighing; User Parameters - Adam ABK Serie Notice Utilisation

EN

ACCUMULATED TOTAL

6.6
•
The scale can be set to accumulate manually by pressing the
[Print/M+/Esc] key, or automatically when a weight is removed
from the scale. See the Section 7.3 of the full manual for details.

PERCENTAGE WEIGHING

6.7
The scale can be set to perform percentage weighing. See Section 7.2 of the
full version of the user manual for complete details.
ANIMAL (D
6.8
The scale can be set to animal (dynamic) weighing for weighing any items
that are unstable or may move. See Section 7.4 of the full version of the user
manual for complete details.

7.0 USER PARAMETERS

Pressing the [Func/C] key during normal operation allows the user to access
the parameters for customizing the scale. The parameters are split into 4
groups-
1. Check weighing parameters,
2. Percentage and Animal Weighing Functions
3. RS-232 parameters
4. Scale parameters
• When [Func/C] is pressed the display will first show "FunC 1" for Check
weighing parameters.
• Press either the [Func/C] key or the [Pcs/ ] to advance through the
groups "FunC 1", "FunC 2" , "FunC 3" and "FunC 4". Press [Z/T] to enter the
desired group of parameters.
• When in one of the sections press [Print/M+/Esc] to return to the group
"FunC 1". If you press [Print/M+/Esc] again, the scale will exit the User
Parameter section and return to normal weighing.
Complete details of all parameters can be found in of the full version of the
user manual.
© Adam Equipment Company 2015
) WEIGHING
YNAMIC
12 3116611621RevA1-Feb15