English (Original Instructions) - DeWalt XR Li-ion DCG412 Manuel D'instructions

EnGLIsh
CORDLESS GRINDER
DCG412
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power input
No-load/rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
* weight includes side handle and guard
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
42
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Cordless Grinder
DCG412
DCG412
V 18
D WALT declares that these products described under Technical
DC
e
3/11
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
Li-Ion
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
W 405
These products also comply with Directive 2014/30/EU and
min 8000
-1
2011/65/EU. For more information, please contact D
mm 125
the following address or refer to the back of the manual.
mm 6
The undersigned is responsible for compilation of the technical
M14
file and makes this declaration on behalf of D
mm 16
kg 1.9*
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
dB(A) 84
D-65510, Idstein, Germany
dB(A) 95
01.06.2019
dB(A) 3.5
Definitions: Safety Guidelines
m/s 2 7.1
The definitions below describe the level of severity for each
m/s 2 2.2
signal word. Please read the manual and pay attention to
these symbols.





WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e