Location Of Installation; Installation - Dolphin PROLITE IP65 Série Manuel D'installation Et D'utilisation

LOCATION OF INSTALLATION

Never place charger above battery being charged. Gases from battery will
corrode and damage charger.
The unit is ignition protected: ProLite chargers can be installed in spaces
containing gasoline powered machinery, or gasoline fuel tank(s), or other
connection(s) between components of a gasoline system.
Fuel
tank
Equipment protected against ignition of flammable gases
Possible areas for installing the Prolite charger
Prohibited area for installation of the Prolite charger
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
GEL AGM LEAD
CALCIUM
LITHIUM
3 sec for Press
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT

Installation

All ProLite chargers are designed to be permanently mounted on-board
and should be mounted with cables down. More details «TECHNICAL
SPECIFICATIONS», page 18.
NOT-PROLITE-02
Fuel
tank
Engine
+ -
12 V
Engine
+ -
12 V
EN
Fuel
tank
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
3 sec for Press
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
6