Conformité ISO 8846
June 14
th
, 2019
Cats Power Design
144, route des Vernes
74370 Pringy - France
To Whom It May Concern:
IMANNA Laboratory tested samples of the ProLite 12.25 and ProLite 12.15 battery chargers for ignition protection. These
tests were conducted in accordance with SAE J1171:2017 and ISO 8846:2016. The results of these tests are covered
under IMANNA Reports 21317-1 and 21359-1 for the ProLite 12.25 and ProLite 12.15, respectively. The results indicate
that both chargers comply with the requirements stated in SAE J1171:2017 and ISO 8846:2016 and are certified as
ignition protected.
Sincerely,
Robert L. White, Pres.
Conformité FCC
Certifié conforme à la norme UL STD.1236
Certifié conforme à la norme CSA STD. C22.2 No. 107.2
Conçu et fabriqué conformément à ABYC A-31
NOT-PROLITE-02
515 Gus Hipp Blvd.
Rockledge, Florida 32955
Telephone (321) 632-2008
www.imanna.com
Post Office Box 560933
Rockledge, Florida 32956-0933
FAX (321) 690-3360
E-mail: info@imanna.com
FR
25