Iso 8846 Ignition Protected / Sae J1171:2016 Certified; Fcc Conformity - Dolphin PROLITE IP65 Série Manuel D'installation Et D'utilisation

EN
ISO 8846 Ignition Protected / SAE J1171:2016 certified
June 14 th , 2019
Cats Power Design
144, route des Vernes
74370 Pringy - France
To Whom It May Concern:
IMANNA Laboratory tested samples of the ProLite 12.25 and ProLite 12.15 battery chargers for ignition protection. These
tests were conducted in accordance with SAE J1171:2017 and ISO 8846:2016. The results of these tests are covered
under IMANNA Reports 21317-1 and 21359-1 for the ProLite 12.25 and ProLite 12.15, respectively. The results indicate
that both chargers comply with the requirements stated in SAE J1171:2017 and ISO 8846:2016 and are certified as
ignition protected.
Sincerely,
Robert L. White, Pres.

FCC conformity

Designed and tested comply to UL STD 1236
Designed and tested comply to CSA STD C22.2 No 107.2
Designed and built to ABYC A-31 standards
25
515 Gus Hipp Blvd.
Rockledge, Florida 32955
Telephone (321) 632-2008
www.imanna.com
Post Office Box 560933
Rockledge, Florida 32956-0933
FAX (321) 690-3360
E-mail: info@imanna.com
NOT-PROLITE-02