Operating Instructions - Dolphin PROLITE IP65 Série Manuel D'installation Et D'utilisation

OPERATING INSTRUCTIONS

The ProLite charger is design to charge battery of the same type. Do not mix
battery type.
ATTENTION
It is important to select the correct charging profile for your battery. If you are
still unsure what kind of battery you have we recommend that you contact the
manufacturer of the battery.
Selecting a charging profile
1. Power-on the charger connected to the batteries.
Note that during the power-on of the charger, the LED indicates for a few
seconds the current cycle charge (refer to below color vs cycle).
2. Wait a few seconds and verify that the charger is correctly charging the
batteries (NORMAL mode).
3. If necessary, press the push-button for 3 secondes : the charger enters the
SETTING mode, and the LED is blinking.
4. Press down the push-button the number of times equal to the selected
charging profile using the LED colour code.
Led
Green
Yellow
Red
Green / red
5. After your choice, wait a few seconds, the charger returns automatically in
NORMAL mode.
NOT-PROLITE-02
Type de batterie
Open Lead
AGM - Gel
Lead Calcium
Lithium
EN
12