Serial Number; Choosing The Charging Curve; Maintenance; Safety Battery Instructions - Dolphin PROLITE IP65 Série Manuel D'installation Et D'utilisation

US Version: External connections to the battery charger shall comply with the
United States Coast Guard electrical regulations (33CFR183, Sub Part 1).
Output batteries must be connected to the charger before its power-on.
This device complies with enforced standards regarding emitted interferences
and disturbances of external origin.
Regarding electromagnetic interferences, ensure that other materials used are
compatible with this device in order to avoid irreversible damage.

Serial number

The S/N is available on the grey sticker on the top side of the charger.

Choosing the charging curve

WARNING
• It is important to choose the correct charging curve, appropriate with the
battery technology. An incorrect choice can cause irreversible damage. In
particular, risk of overheating and noxious gases in case of overvoltage to the
battery.
The LITHIUM cycle charge is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).

Maintenance

If necessary, fuses on positive access must be replaced with identical products.
This charger cannot be dismantled and thus, the electronic power board is
inaccessible. Except fuses, therefore, any maintenance on site is prohibited.

Safety battery instructions

DANGER
• Disconnect both AC and DC power from the battery charger before attempting
and maintenance or cleaning or working on any circuits connected to the battery
charger.
• When disconnected make sure battery terminals are fully insulated.
NOT-PROLITE-02
EN
4