Pause/Cancel; Setting The Clock; Funktion +30Sec; Timer - CASO DESIGN IMCG25 Mode D'emploi Original

14.8 Pause/Cancel

In order to interrupt an ongoing cooking programme, you can proceed as follows:
Press the Pause/Cancel button once. The cooking programme that is in use will be
stopped.
Or: Open the door of the device. The cooking programme that is in use will be stopped.
► To continue the interrupted cooking program, press the button Start/Quick Start after
closing the door.
To terminate the interrupted program, press the button Pause/Cancel a second time.
You can terminate the interrupted program, with opened door, also by pressing

14.9 Setting the clock

To set the clock on the device, proceed as follows: Press button
cloc, in 24 or 12-hour cycle by pressing
Example: You want to set the oven clock time to 8:30. Choose to set the cloc, in 24 or 12-
hour cycle by pressing
the setting.

14.10 Funktion +30sec

In microwave, grill, convection and combination mode you can extend the cooking time
with +30sec, with each pressing for 30 seconds.
You cannot use this function with quickstart and not with automatic cooking programms.

14.11 Timer

You can programm the device so that the programm will start and later time (timer).
For example: Now the clock shows 11:10 and you want that the cooking will start at 11:30.
Enter a cooking program and press button P. (
 Setting the time
Touch 10Min/1Min/10Sec to set the time „11:30"
Close the door of the device. Press Start/Quick Start to confirm the settings.
► When the programmed time is reached, the system will start dhe preset cooking
program.
► After starting the timer function, you can press P to check the programmed time. With
Pause/Cancel you can cancel the timer function. (
► You cannot use the timer for quickstart and not for defrost.
Please note
.
. Press 10Min/1Min/10Sec, to enter „8:30". Press
Please note
. Choose to set the
is shown in the display).
switches off in the display).
.
to confirm
66