SOMFY TaHoma Notice Installateur page 40

TaHoma
®
9.2.2. Configuring rooms by floor
- Select the rooms on each floor by dragging and dropping.
To remove a room, drag and drop it into the trash can
icon .
Each room can be renamed by clicking its name, either
in the list on the right-hand side of the screen or when it
has been placed on a floor.
- Once you have selected the rooms on each floor, click the
"next" button.
9.2.3. Configuring end-products by room and outside
area
- Select the io-homecontrol
dragging and dropping them into the corresponding room
or outside area.
To remove an end-product from a room or outside area,
click the room or outside area to display the list of
end-products in it, and then drag and drop the end-products in it, and then drag and drop the end-products in it, and then drag and drop the end-products in it, and then drag and drop the end-products in it, and then drag and drop the
end-product into the trash can icon
is not deleted from TaHoma
devices" list).
Click the icon for an end-product to start the identification
procedure: the end-product moves back and forth. To
end the procedure, click the "stop" button.
An end-product can be renamed by clicking its name.
- When all of the end-products have been placed, close
the window by clicking the bottom menu bar to go to the
installation's home menu.
8
or RTS end-products by
®
(the end-product
; it returns to the"unplaced
®
Copyright © 2010-2012 Somfy SAS. All rights reserved.