GE Monogram ZFSB27DYBSS Guide D'utilisation Et D'entretien page 5

Set the
The temperature controls let you regulate the
temperature in the fresh food and freezer
temperature
compartments.
controls
At first, set the Fresh Food control at "5" and
(appearance
the Freezer control at "C."
may vary)
Allow 24 hours for the temperature to stabilize,
whether you are setting the controls for the first
time or adjusting them later. Then, if you want
colder or warmer temperatures in either
compartment, adjust the controls one step at a
time.
NOTE: Moving the Fresh Food control to OFF
turns off cooling in both compartments—fresh
food and freezer—but does not shut off power to
the refrigerator.
How to test
Use the milk test for the fresh food
compartment. Place a container of milk on the
temperatures
top shelf in the fresh food compartment.
Check it a day later. If the milk is too warm or
too cold, adjust the temperature controls.
Automatic
You won't find an "energy saver" switch on this
refrigerator.
energy saver
system
Warm liquid from the refrigerator's condenser
is automatically circulated around the front
edge of the freezer compartment to help keep
moisture from forming on the outside of the
refrigerator during humid weather.
Operating Instructions
Stainless Steel Refrigerator
A B C
Freezer Control
C is Initial Setting
E is Coldest
OFF 1
Use the ice cream test for the freezer
compartment. Place a container of ice cream in
the center of the freezer compartment. Check
it after a day. If it's too hard or too soft, adjust
the temperature controls.
Always allow 24 hours for the refrigerator to
reach the temperature you set.
Many refrigerators use special electric heaters.
This refrigerator needs none. That's why there is
no "energy saver" switch...there's no need for it.
D E
3 5 7 9
5