Releasing The Pressure - Parker Test-kit Manuel D'utilisation

Wait until the pressure has stabilized before beginning with the pres-
sure measurement.
2 Compare the measured value reading on the ServiceJunior with the measured value
reading of the test object.
3 Record the results.

5.3 Releasing the Pressure

After completing the pressure measurement, the excess pressure must be released from
the test kit.
CAUTION!
Risk of injury through escaping hydraulic fluid.
► Never disassemble components connected to the test kit when it is pres-
surised!
► Open the pressure release valve before disassembling components!
V2.0/07/20
Operating the Test Kit
19