Parker Test-kit Manuel D'utilisation page 38

Operating the Test Kit
Risk of material damage to the test object due to excess pressure.
► Never exceed the maximum permissible pressure of the test object!
► Press the hand grips together carefully to generate a preliminary pressure
and slowly turn the fine adjustment valve clockwise to increase the pres-
sure!
Information on Operating
Observe the following information with regard to operating the test kit:
„ Pay attention that no air is drawn in during the pumping process!
► Hold the test kit at a slight angle so that the intake socket is always enclosed by
hydraulic fluid!
„ Pay attention that there is sufficient hydraulic fluid in the supply tank.
► If the quantity of hydraulic fluid is too low, refill it.
„ In the case of small volume, well-ventilated systems, a high pressure is built up after
16
V2.0/07/20