Installation and operating instructions
CHAPTER 6
CONFIGURATION (GUI)
NOTE
Control set KWL 45 STS-UP/HS
6.0
EcoVent Verso (GUI) – Overview
Description:
Language selection
HELP button with display
Load factory settings from controller
End programme
Read from controller
Write to controller
Load from file (open saved configuration from PC)
Save to file (Operating hours display)
Configuration fields
Operating hours display
6.1
USB interface
Connection to controller
fig.5
LED 1 flashing
©
LED1 flashing (green)
USB connection cable connected to
controller.
NOTE:
The controller must be connected to the power supply voltage 12 V DC.
Firstly, connect the USB cable to the PC, then to the controller!
fig.6
LED 1 + 2
flashing
©
LED1 and LED 2 flashing (green)
USB connection cable connected to
controller and communication with soft-
ware is established.
14
UK