Cochlear Baha BP110 Power Mode D'emploi page 3

Welcome
Congratulations on your Cochlear
You are now ready to use Cochlear's highly advanced bone conduction sound processor.
This manual is full of tips and advice on how to best use and care for your Baha sound
processor. By reading this manual and then keeping it handy for future reference, you'll
ensure that you get the most benefit out of your Baha sound processor.
Key to device
See figure 1
1. Microphones
2. Battery compartment door
3. Direct Audio Input
4. Visual status indicators
5. Volume up button
6. Plastic snap connector
7. Program button, on/off button
8. Volume down button
9. Attachment point for the safety line
Note on figures: The figures included on the
front cover correspond to information specific to
this model of sound processor. Please reference
the appropriate figure when reading. The images
shown are not to scale.
Baha BP110 Power Sound Processor.
™ ®
Introduction
The Cochlear
Processor uses direct bone conduction to transmit
sounds to the cochlea (inner ear). It works by
combining a sound processor and a small titanium
implant that is placed in the skull behind the
ear. The skull bone integrates with the titanium
implant through a process called osseointegration.
This allows sound to be conducted via the skull
bone directly to the cochlea, which improves
hearing performance.
You should have received your Baha sound
processor from your hearing care professional
along with the contents of this kit. To ensure
optimal performance, your hearing care
professional will fit the processor to suit your
needs based on your connnection configuration.
Be sure to discuss any questions or concerns that
you may have regarding your hearing or use of this
system with your hearing care professional.
Be sure to follow all applicable instructions in
this manual based on your specific connection
configuration.
Baha BP110 Power Sound
™ ®
English
3