Winterization And Storage - Dometic 300 Série Mode D'emploi

8 Cleaning
8.1 Routine toilet cleaning
For routine cleaning, use Dometic
be found in your area, contact Dometic for your nearest dealer. If the cleaner
is not available, use most any non-abrasive bathroom and toilet bowl cleaner.
Please follow label instructions.
For stubborn stains on model 300 and 301 toilet bowls, carefully use rubbing
alcohol to remove them.
8.2 Flush ball/seal cleaning
After a period of time, mineral deposits from
hard water may build up on the flush ball
or seal, resulting in a slow water leak. To
prevent this, periodically clean the flush ball
and seal.
1. Remove minor debris from the flush ball
and seal by slowly pressing and releas-
ing the flush pedal several times. This will loosen and rinse debris from the
surfaces. Repeat several times for stubborn buildup.
2. If step 1 does not fully clean the ball and seal, clean with a soft bristle
brush and SeaLand toilet bowl cleaner. Fully clean the top of the flush ball
and under the seal where it contacts the flush ball.
3. After cleaning, lightly press down around seal to assure it will properly seal
against flush ball.
4. If this does not correct a leaking seal, it may require replacement.
9

Winterization and storage

When a Dometic toilet is stored for long periods of time or may be exposed to
temperatures below freezing, the toilet must be winterized or stored according
to one of the following procedures.
Caution
This toilet is not intended for use when exposed to temperatures
below freezing.
Toilet Bowl Cleaner. If this cleaner cannot
®