NSK M40 XS Manuel D'utilisation page 6

3. Connection & Disconnection of the Motor and the Motor Cord
3-1 Connection
1) Align the coupling to the correct holes and pins then insert the motor firmly into the motor
cord.
2) Tighten the Motor Cord Nut securely.
3-2 Disconnection
Loosen the Motor Cord Nut. Gently separate the motor from the cord.
CAUTION
Make sure that the motor cord nut is firmly tightened. Loose connection may cause a water leakage or motor may not function properly.
Motor
Motor Cord Adaptor
*Picture shows M40 XS.
Motor Cord Nut
Motor Cord
Fig. 1
5