Warn 88225 Instructions D'installation page 5

5. Position bumper to vehicle. Install bumper using fasteners
(B4) in the lower fastener locations. Use fasteners (B9) in
the rear fastener locations.
6. Tighten all fasteners.
7. Install fairlead (C1) to bumper. Fairlead and fasteners are
supplied with winch kit. See figure 4.
8. Install winch (C2) to bumper. Winch fasteners supplied in
winch kit. See figure 5.
9. Install bumper plate (A4) to bumper (A1) using fasteners
(B6, B2, B7). See figure 6.
10. Install winch wire as described in winch mounting
instruction supplied in winch kit.
©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5 88226A1