How To Attach The Stand; How To Remove The Stand - Hitachi ULTRAVISION C55LS8 Guide Du Propriétaire

How to attach the stand

NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1 Carefully place the TV screen face-down on a clean, cushioned surface.
2 Insert and secure the stands with 2 screws (supplied), on each side, as shown in Figure 1.
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation
of the stand will not support your TV correctly, and could result in damage or injury from
tip-over.

How to remove the stand

When you transport this product, remove the stand and pack it flat against the back of the
unit in the carton. To remove the stand, perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands. To disconnect the stand remove
the screws from the bottom of TV.
EN8
Stands
Screws
Figure 1