Transportation And Placement; Visual Check; Transportation - LEGRAND Keor MOD Top Entry Instructions D'installation

2. Transportation and placement

2.1

Visual check

On delivery, carefully inspect the packaging and the equipment for any damage that might have occurred during
transport. Check there is no damage to the indicator on the outer label reading "Shock Watch".
If there is possible or ascertained damage, immediately inform:
- the transporter;
- the LEGRAND Technical Support Service.
Check that the equipment corresponds with the items indicated in the delivery documentation.
The equipment and the relative supplied accessories must be in perfect conditions.
2.2

Transportation

WARNING
The equipment must be placed and stand in a vertical position throughout the transportation. It shall also be
packed properly.
Move the equipment very carefully, lifting it as little as possible and avoiding dangerous swings or falls.
Follow always the directions indicated in the symbols present on the packaging.
The equipment must always be handled by trained and instructed personnel. Comply with the safety regulations in force
in your country relative to the usage of lifting equipment and/or accessories.
For any lifting, use a forklift or a transpallet with an adequate carrying capacity, placing the forks in the specific spaces of
the base and making sure they come out on the other side by at least twenty centimeters.
The equipment has wheels at the bottom of the cabinet. Before installations and while it is still empty, it can be moved
by hand by at least two people.
Keor MOD Top Entry
17