Unpacking - LEGRAND Keor MOD Top Entry Instructions D'installation

2. Transportation and placement
2.3

Unpacking

To remove the packaging material, two people are required and they must comply with the following procedure:
- bring the item to the installation site using a forklift and/or a truck pallet with suitable characteristics (fig. 1);
- remove the plastic film and cardboards;
- bring down the wooden chute attached to the pallet and loose the screws of the brackets that fix the equipment on the
pallet (fig. 2);
- gently slide by hand the equipment along the chute using the wheels (fig.3);
- loose the four screws and remove the bracket on the right side of the equipment that fixed it to the pallet (fig.4).
(fig. 1)
18