Beaba BIB EXPRESSO Mode D'emploi page 13

Water distribution: 22°C
Water distribution: 37°C
Water distribution: 37°C
* heating time will depend on volume and initial water temperature
** mixing water with milk formula reduces the final temperature
BAIN MARIE MODE
The bain-marie mode should be used for heating bottles and jars. The bain-marie
mode does not allow you to control the exact temperature of the preparation you
are heating. The choice of the bain-marie mode should be adapted to the amount
of preparation to be heated and material of the container:
• Mode 1 :
small quantity or glass container
• Mode 2 :
large quantity or plastic container
1. Open the lid of the heating unit#1.
2. Fill the heating unit#2 with water to «Max» level.
3. Place the bottle or jar to be heated in the heating unit#2.
4. Select and press the button for the chosen mode, you will hear a beep and
the button will flash during the heating process.
5. At the end of the heating cycle, the appliance beeps three times and the
button's light switches off.
BE CAREFUL, RISK OF BURNING
6.
a cloth to avoid the risk of burns.
7. Close the lid#1 and wait for the water to cool down before emptying the unit.
8. After mixing the contents of the jar or shaking the bottle, always check that
the temperature of the food is not too high and that there is no risk of burning
your child.
Initial water
temperature
Fridge Temperature
Fridge Temperature
Room Temperature
13
Final temperature of
Heating Time *
30-60 s
30-60 s
18 – 50s
Rremove the bottle or the jar with
bottle **
22-24°c
37-39 °c
37°C-39°C