Trigano Lima 300 Notice De Montage page 15

FOR INFLATION
• On the pump (1): Connect the inflation tube to
the pump body.
• On the valve (2): Remove the valve cap (A), fit
the appropriate valve adapter to the end of the
inflation tube (B) and connect it to the valve.
You may now begin inflating the pole with smooth
and regular pump strokes.
Once the pole is inflated to the correct pressure,
remove the tube (B) end and refit the valve cap (A).
Inflate each pole to:
0.344 BARS / 5 PSI.
DO NOT INFLATE ABOVE
THESE VALUES AS THIS
MAY RESULT IN THE POLES
BURSTING.
TO DEFLATE
• Simply unscrew the deflation plug (refer to the
picture above) (C).
Notice LIMA 300 ET 410.indd 15
1
2
3
- 15 -
ENGLISH
A
B
C
12/11/2018 17:52