Trigano NORTH-TWIN Notice De Montage page 17

4 - Insert the rear fixing bar into the corresponding
sleeve and fix the suction cups to the vehicle
after cleaning the surface carefully to ensure
that they adhere. (Fig. C)
At this stage, if it is not possible to use the suction
cups for any reason, the awning can be set up wi-
thout them, using the 2 guy ropes provided for the
purpose. (Fig. D)
These should therefore be passed over the roof
and pegged behind the vehicle.
5 - Now that the awning is correctly positioned and
fixed to the vehicle, peg out the whole awning
and secure all the guy ropes to the ground.
Notice NORTH-TWIN.indd 17
C
Guying rope
D
- 17 -
ENGLISH
exemple de montage
avec des ventouses
04/10/2019 12:19