Gps Information Display - Eclipse CD5100 Manuel D'utilisation

GPS information display

The following GPS information can be displayed
in addition to map information when an optional
GPS unit is connected:
• Directional heading
• GPS reception
• Latitude/longitude
• Compass
• Speed indicator display
Press the [SELECT] (Upper/Lower)
1
button to select GPS INFO then
press the [ENTER] button.
The GPS information setting mode is
activated.
Press the [SELECT] (Upper/Lower)
2
button to OFF, Type A, Type B or
Type C.
The following information is displayed
depending on
selected:
OFF: No display
Type A: Directional
reception, compass
Type B: Latitude/longitude,
reception, compass
Type C: Speed
reception, compass
3
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM/MENU]
4
[RTN] button
adjustment mode.
Making changes with Display Adjustment Mode
the display type
heading, GPS
GPS
indicator, GPS
or
to exit display
ATTENTION
• When GPS INFO is switched ON and "GPS
information" is selected in the screen
settings, the main unit display a information
(see page 19).
• The information is displayed in the following
way.
Type A
Type B
Type C
Directional heading/
8 directional headings (North/Northeast/
East/Southeast/South/Southwest/West/
Northwest)
GPS reception
Displays the condition of the GPS signal
being received.
Latitude/longitude:
Speed indicator display:
Displays the estimated speed that the
vehicle is traveling at based on GPS
information received.
• The GPS information display may be
inaccurate depending on the quality of GPS
reception.
• GPS information
approximately one second intervals. For
this reason, contents displayed on the
screen may change even if the vehicle is
stopped.
Compass:
is updated at
53
XI