Crossover Adjustment (X-Over); Non-Fader Phase (Non-F Phase) - Eclipse CD5100 Manuel D'utilisation

Various Settings

Crossover adjustment (X-Over)

Allocate specified frequency bands to each
speaker for improved sound integration.
Press the [SELECT] (Upper/ Lower)
1
button to select the X-Over.
2
Press the [ENTER] button.
The crossover
activated.
Press the [ENTER] button to select
3
LPF or HPF.
When the button is pressed, the
setting item changes as follows.
*1 *2
↔
LPF HPF
*1: Cut-off frequency is 80 Hz.
*2: Cut-off frequency is 100 Hz.
Press the [SELECT] (Upper/Lower)
4
button to select the slope ON/OFF.
Slope is 12dB/oct under ON.
Press the [CUSTOM/MENU]
5
[RTN] button
adjustment mode.

Non-fader phase (Non-F Phase)

The merging of sound between the front and rear
speakers and the woofer can be improved by
selecting the phase. Switch the phase to a phase
which lets the speakers combine without any
disharmony.
Press the [SELECT] (Upper/ Lower)
1
button to select the Non-F Phase.
2
Press the [ENTER] button.
The non-fader
activated.
50
setting mode is
or
to exit sound
phase mode is
Press the [SELECT] (Upper/Lower)
3
button to select
Reverse.
Upper: Normal
Lower: Reverse
Press the [CUSTOM/MENU]
4
[RTN] button
adjustment mode.
Normal or
or
to exit sound