hager TG 500A Guide D'installation page 26

Contents
Presentation ................................... 26
- Operation principle ........................ 26
- Description..................................... 27
Power supply.................................. 28
Installation of the detector ........... 28
- Selection of the installation
location .......................................... 28
- Fixing.............................................. 29
- Installing several detectors
in a network ................................... 30
Testing the detector....................... 31
Manual disabling
of the detector............................... 32
Indication of faults ......................... 32
- Power supply fault......................... 32
- Indication of detection head
clogging ......................................... 33
Maintenance ................................... 33
- Detection head maintenance ........ 33
- Battery replacement ...................... 34
- In case of works ............................ 34
User sheet ............................... 35 - 36
Technical characteristics .............. 37
26
TG 500A (white)
TG 500B (silver)
TG 501A (white)
Presentation
Operation principle
This optical smoke detector is intended for the
protection of private apartments in buildings, or
homes, mobile homes and motor homes.
It can be: - Used as a standalone unit, or
- Inter-connected in a wired network of up to
40 detectors.
In the event of smoke detection:
Detector at the
source of the smoke
detection signal
The unit flashes quickly
An emergency
light is turned on
A built-in alarm
is activated on a
continuous basis
(85 dB(A) from 3m)
Other detectors
with wired
inter-connection
-
An emergency
light is turned on
A modulated
built-in audible alarm is
activated
(85 dB(A) from 3m)