Flexible Arm Installation - NEC MultiSync LCD195NXM Manuel De L'utilisateur

Flexible Arm Installation

This LCD monitor is designed for use with a fl exible arm. To mount the
monitor to a fl exible arm:
1. Follow the instructions on how to Remove Monitor Stand for Mounting
to remove the stand.
2. Using the 4 screws that were removed from the stand, attach the arm
to the monitor (Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm
(e.g. GS mark). To meet the safety requirements, the monitor must be
mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor.
12mm
4 x 12mm with lock
washer and flat washer
Figure F.1
100mm
4 Screws (4M)
(Max Depth: 14 mm)
M4
Note: Please use the screws (4pcs) that
were removed from the stand when
mounting fl exible arm.
100mm
10
Thickness of Bracket (Arm)
2.0~3.2mm
Weight of LCD assembly:
5.7kg MAX