Flexible Arm Installation - NEC MultiSync LCD1970V Manuel

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to
a flexible arm:
1. Follow the instruction on how to Remove Monitor Stand for Mounting to
remove the stand.
2. Use the 4 screws from the stand removal to attach the arm to the monitor
(Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark).
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
100mm
4 Screws (4M)
(Max Depth: 8.5mm)
Figure F.1
100mm
8
Thickness of Bracket (Arm)
2.0~3.2 mm
Weight of LCD assembly:
4.9kg MAX (LCD1970V)
4.9kg MAX (LCD1970VX)
5.4kg MAX (LCD1970NX)