NEC MultiSync LCD195NXM Manuel De L'utilisateur page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ing section of this User's Manual.
Raise and Lower Monitor Screen
The monitor may be raised or lowered. To raise or lower screen, place
hands on each side of the monitor and lift or lower to the desired height
(Figure RL.1).
NOTE: Handle with care when raising or lowering the monitor screen.
Figure RL.1
Screen Pivot
Before rotating, the screen must be raised to the highest level to avoid
accidentally damaging the screen and to avoid pinching fi ngers. With
one hand, grip the top of the display by the handle using the other
hand to grip the bottom Lift up to the highest position. (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and
turn counter-clockwise from Landscape to Portrait or clockwise from
Portrait to Landscape (Figure R.1).
NOTE: Disconnect cables before rotating the screen. Re-connect
cables when screen is in desired position.
Display Setup
7
- continued

Publicité

Table des Matières
loading

Table des Matières