NEC MultiSync LCD195NXM Manuel De L'utilisateur page 7

8. Hold the all cables fi rmly and place the cable cover onto the stand
(Figure 8). To remove the cable cover, lift the cover off as shown in
(Figure 9).
9. Connect the power cord to the power outlet (Figure 10).
NOTE: If you have diffi culty removing the cable cover, please push
the cover up (towards the top of the monitor) in order to unhook the
cover from the stand, then remove, as shown in (Figure 11). Handle
with care when removing cable cover.
Figure 7
Figure 8
Display Setup
5
- continued
(NX models only)
Figure 9