JB Systems SUPER ORION Mode D'emploi page 7

ENGLISH
HOW TO SETUP:
MAIN MENU:
 To select any of the menu options, press the MENU
button up to when the required option is shown on
the display.
 Select the function with the ENTER button. The
display will blink.
 Use DOWN and UP button to choose the desired
menu option.
 Once the required menu option is selected, press
the ENTER button to select.
 Press the MENU button for about 2 seconds to
store the setting and to return to running mode. If
you don't do this, the setting will not be stored and
after about 8 seconds, the fixture will return to the
previous running mode.
DMX512 Address Setting
Used to set the start address in a DMX setup.
 Press the MENU button until
the display.
 Press the ENTER button to select.
 Use DOWN and UP buttons to change the DMX512
address.
 Once the correct address is shown on the display,
press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to
store the setting and to return to running mode.
Channel Mode
The unit has 2 different channel modes. Refer to
the DMX-chart to see the differences.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select one of the available channel modes.
 Once the mode is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to store the setting and to return to running mode.
Show Mode
Used to select one of the preprogrammed shows when used in standalone or master/slave mode.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP buttons to select one of the preprogrammed shows:

 all shows played at random.

to
 Once the right show is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to store the setting and to return to running mode.
Slave Mode
By choosing the right slave mode you can improve the impact of the shows.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select slave mode 1 or slave mode 2.
JB SYSTEMS
®
is shown on
is shown on the display.
is shown on the display.
 12 different built-in shows.
is shown on the display.
5/48
OPERATION MANUAL
SUPER ORION