TILT (UP / DOWN)
Pressing the UP or DOWN buttons will tilt the screen in 5°
increments either UP (back) or DOWN (forward). Once set, the
unit will remember the position whenever the screen is opened.
Angle Adjustment
If the screen has been angled for viewing, always ensure the screen is repositioned
straight to the unit before attempting to close the screen, to turn off the unit or to
NOTE:
turn off the vehicle.
While the screen is in the open position, the screen can be manually angled to allow better viewing. Grasp
and pull either the lower left or right side of the screen to angle it.The screen must be repositioned
straight before you close the screen, turn off the unit or turn off the vehicle.
Angled Left
Screen Auto or Manual Mode
To prevent the screen from automatcally closing when the unit or
vehicle is turned off, the screen can be set to manual mode.
Press and hold both the I/O (In/Out) button on the video screen and
the
{UP} button on the faceplate until "MANUAL" appears on the
LCD Display.The video screen is now set to manual mode.To reset to
automatic, press and hold the buttons again until "AUTO" appears on
the LCD Display.
VOLUME
The Volume knob on the Source Unit is a multifunction controller
and handles the Volume, power on/off and used to enter selected
menu items while in set-up screens.
To Control Volume
1. Turn the VOLUME knob clockwise, or press the "+" button on
the remote, to raise volume.
2. Turn the VOLUME knob counter-clockwise, or press the "-"
button on the remote to lower volume.
The display will shown the volume level when is is changed.The unit
will remember the set volume level.
MUTE
1. Press the MUTE button to dampen the volume.
2. Press the MUTE button a second time to revert the audio to
the previous level.
NOTE: The panel will display MUTE until the function is canceled.
Straight
12°
Pull lower corner
to angle screen
O
PERATION
Angled Right
12°
Remote
Remote
– B
ASIC
15