Control Panel - Weston PRO-2500 CHAMBER Mode D'emploi

CONTROL PANEL

. ON/OFF Button: When the Chamber Vacuum Sealer is connected to
power, the LED Display will show OFF. Press the ON/OFF Button once to
engage the functions of the Chamber Vacuum Sealer. The LED Display will
initially show the preset sealing time. Press the ON/OFF Button again to
change the sealer to standby mode (the display will show OFF).
. Function Button: When the Chamber Vacuum Sealer is ON, use the
Function Button to choose between Vacuum Seal Mode or Vacuum Marinate
Mode. The indicator light next to each mode will illuminate when selected.
. Vacuum Degree Button: Press the Vacuum Degree Button to adjust the
chamber pressure. Use the "+" and "-" buttons to adjust the pressure up or
down. The Hg will be indicated in the LED Display. Increasing the vacuum
degree will allow for larger bags to be evacuated faster.
. Indicator Lights: The Indicator Lights correspond with the adjustable
Vacuum Degree. The Vacuum Degree is adjustable between 29.5" Hg at the
Max and 23.5" Hg at the Minimum.
.
Start Button: When the Chamber Vacuum Sealer is ON, use the Start
Button to to enter initiate Vacuum Seal Mode or Vacuum Marinate Mode
(depending on the Function setting).
.
Seal Button: During Vacuum Seal Mode, press the Seal Button. This will
stop the vacuum process and the Chamber Vacuum Sealer will seal the bag.
.
Stop Button: Press the Stop Button to stop any process underway.
Seal Time
Marinate Time
Function
Max
High
Medium
Low
Minimum
Adjustable
Vacuum
Degree
ON/OFF
Start
Seal
Stop
9