Control Panel; Cancel Button - Weston HARVEST GUARD 65-1001-W Mode D'emploi

CONTROL PANEL

POWER LIGHT: The Power Light will remain illuminated when the Vacuum
Sealer is connected to the power supply.
NORMAL / EXTENDED SWITCH: The Normal or Extended Switch is used
for adjusting the seal time when vacuum sealing thicker bags or bags with
moisture.
VACUUM & SEAL BUTTON: The Vacuum & Seal Button starts the Vacuum
Pump, which engages the air evacuation process and engages the Seal Bar
Heating Element.
SEAL BUTTON: This button will start the Seal Bar at any time. ONLY push
this button while the Vacuum Pump is running.
VACUUM ONLY/ACCESSORY BUTTON: Press the Vacuum Only Button
when using any external accessories, via the Vacuum Hose Port. It is also
used when vacuum sealing crushable or fragile items to monitor the amount
of air being removed from the vacuum bag.
CANCEL BUTTON: The Cancel Button stops the vacuum/seal process at any
time in the cycle.
NOTE: The Vacuum Sealer is ONLY intended to be used with VACUUM BAGS. For
best results, only use the recommended vacuum bags with an embossed or mesh lining.
DO NOT USE HOUSEHOLD BAGS! Any other uses of the Vacuum Sealer, other
than the uses described in this booklet, could potentially damage the appliance and void
the warranty!
8
Vacuum Only/
Accessory
FIGURE 3