Light Control - Sharp UA-KIN50E Mode D'emploi

HOW TO CHANGE VARIOUS SETTING
You can change the functions in the table on
page 12, 13.
1.
(with the product OFF)
♪
Press for
3 sec.
2.
Select "Function number".
Forward
♪
or
Set
♪
Function

Light Control

You can select the brightness of the Display and
Cleanliness Indicator.
Reverse
♪
･･･
EN-12
3.
Select "Setting number".
Forward
♪
or
Set
♪
～
4.
Press Power ON/OFF Button to
finish the setting mode.
♪
～
Setting
Turn off
When set to "Turn off", the "Dim" light illuminates
for 8 seconds after operation starts and then the
light turns off.
The Humidify Indicator flashes darker only when
the product needs water.
The Unit Replacement Lamp flashes darker only
when the Plasmacluster Ion Generating Unit
need to be replaced.
Dim
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
• Room is bright: light is ON
• Room is dark: light is OFF
Even though room is bright, the light will turn off
when operating in sleep mode.
Reverse
♪
Turn off