Getting Started; When You Are Finished - ECX TORMENT ECX4000 Manuel D'utilisation

GETTING STARTED

1. Power on the transmitter.
ST. TRIM
TH. TRIM
2. Connect the battery to the Electronic Speed Control (ESC)
and power on the ESC.

WhEN yOU ARE FINIShED

1. Power off the Electronic Speed Control (ESC).
2. Power off the transmitter.
ST. TRIM
TH. TRIM
3. Do a test of the transmitter's control of the vehicle with
the vehicle's wheels off the ground.
ST. RATE
4. Start driving slowly and if the vehicle does not go straight,
adjust the steering trim dial on the transmitter.
notIce: Seat the motor brushes by driving smoothly on a flat
surface during use of the first battery charge. Properly seating the
motor brushes will increase the life and performance of the motor.
3. Disconnect the battery.
4. Remove the battery from the vehicle.
ST. RATE
1
2
EN
7