Specifications; Components; Included Items; Vehicle Preparations - ECX TORMENT ECX4000 Manuel D'utilisation

Transmitter
Frequency
Modulation
Battery
Servo
Power Supply
Output Torque
Operating Speed
Size
1. ECX™ Torment™ 1/10-scale Monster Truck
2. Spektrum™ DX2E transmitter

Included Items

3. AA (4)
4. ECX1075 Battery Charger
ECX1075AU Battery Charger (AU)
ECX3013 Battery Charger (EU)
ECX3013 Battery Charger (UK)
5. 7.2V NiMH battery (DYN1050)

INSTALLING TRANSMITTER bATTERIES

1. Slide the panel open on the bottom of the transmitter.
2. Obey the battery plus (+) and minus (-) diagram in the transmitter
to install 4 AA batteries.
3. Slide the panel closed.
We recommend using only alkaline AA batteries in the transmitter,
however, it is possible to use rechargeable NiMH batteries.
CAUTION: If using rechargeable batteries, charge only
rechargeable batteries. Charging non-rechargeable batteries may
cause the batteries to burst, resulting in injury to persons and/or
damage to property.
NEVER install damaged batteries, batteries of mixed types
or batteries of different ages in the transmitter. Remove
exhausted batteries.
NEVER store the transmitter with batteries installed.

SPECIFICATIONS

2.4GHz
DSM, DSM2, Marine
AA x 4
4.8V~6V (shared with receiver)
41.66 oz (3 kg-cm)
0.23sec/60 degrees of travel
40.5 x 20 x 36.8mm

COMPONENTS

1
3

VEhICLE PREPARATIONS

Electronic Speed Control (ESC)
Input Voltage
Electric Capacity (FET)
Electric Capacity (FET)
PWM Frequency
BEC Voltage
Size
Weight
4
Charger power outlet
terminals not shown.
7.2–8.4V
Forward 80 A/240 A
Reverse 60 A/160 A
1kHz
5 V/1 A
27 x 35 x 17.3mm
34–36 g
2
ST. TRIM
ST. RATE
TH. TRIM
5
EN
3