jbc Advanced Serie Mode D'emploi page 7

ENGLISH
Advanced series cartridge
The cartridge is made of the heating element
which has the heating system, a temperature
sensor and a long life tip.
The long-life tip is basically made of:
1 Copper
2 Iron
3 Chromium
4 Tin plate
Tip care recommendations
Except for the copper core, the rest of metals
are placed galvanically on relatively thin layers,
therefore it is necessary to avoid anything which
could cause their destruction.
To clean the tips, use the sponge included with
the stand and check that it is slightly moisted.
Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should
be used in order to wet the sponge be used in order to wet the sponge
be used in order to wet the sponge be used in order to wet the sponge be used in order to wet the sponge. If normal
water was to be used, it is very likely that the tip
will become dirty due to the salts dissolved within
the water.
To re-tin the soldering tips, we recommend
using the TT 9900 tip tinner/cleaner ref. 9900000.
Fume extractor accessories
For 2245 handpiece
Ref. 0003435
Specially designed for the Advanced Series
2210 and 2245 handpieces. Easily clips onto
the handpiece and can be quickly removed for
easy maintenance.
For 2210 handpiece
Ref.0003450
AC 2600 console
AC 2600
Ref. 2600000
The AC 2600 console is designed for modifying
the original regulation program parameters of the
following Advanced control units:
- AD 2700 soldering station.
- DI 3000 and DI 2850 digital soldering stations.
- AD 4300 and DD 5700 dual soldering stations.
- AR 5800 and DS 5300 desoldering stations.
- AM 6800 rework station.
- DM 6700 4 tool station.
- AL 2500 solder feed system.
In order to connect an AC 2600 console In order to connect an In order to connect an
In order to connect an In order to connect an
2700, , , , , a version 6.0 or above will be necessar a version 6.0 or above will be necessary y y y y . . . . . a version 6.0 or above will be necessar a version 6.0 or above will be necessar a version 6.0 or above will be necessar
A n y l o w e r v e r s i o n w o n ' t a l l o w y o u t o f i x A n y l o w e r v e r s i o n w o n ' t a l l o w y o u t o f i x
A n y l o w e r v e r s i o n w o n ' t a l l o w y o u t o f i x A n y l o w e r v e r s i o n w o n ' t a l l o w y o u t o f i x A n y l o w e r v e r s i o n w o n ' t a l l o w y o u t o f i x
temperatures above temperatures above temperatures above 370ºC (700ºF)
temperatures above temperatures above
temperature will be an 8% higher than the temperature will be an 8% higher than the temperature will be an 8% higher than the temperature will be an 8% higher than the temperature will be an 8% higher than the
selected one selected one. . . . . selected one
selected one selected one
Changes avalaible to perform:
- Fixing the the working temperature.
- Selection of temperature units in Celsius grades
-°C- or Fahrenheit -°F-.
- Modification of sleep temperatures and standby
times.
- Adjustment of temperature.
- Set the parameters back to the original
parameters.
- Read-out data:
Working hours.
Sleep cycles and sleep hours.
Cartridge and iron changes.
Program version.
JBC reserves the right to make technical changes without prior
notification.
6
console to an console console to an AD to an to an
console to an
370ºC (700ºF) 370ºC (700ºF) and the sleep 370ºC (700ºF) and the sleep and the sleep and the sleep
370ºC (700ºF) and the sleep