Commissioning; Safety Information - CASO DESIGN TC 2100 Thermo Control Mode D'emploi Original

Danger
► If the connection lead is damaged, you will need to have a
special connection lead installed by an authorized electrician.
► If the surface is cracked, switch off the appliance and switch
off the fuse to avoid the possibility of electric shock.
► Do not operate this device if its power cable or plug is
damaged, if it does not work properly or if it is damaged or
has been dropped. If the power cable is damaged, it will need
to be replaced by the manufacturer or his service agency or a
similar qualified person, to avoid any dangers.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device
can also occur.
► Do not touch the appliance or the mains plug with wet hands.
► Do not immerse the appliance in water or other liquids, and
do not put it in the dishwasher.
► Do not insert objects into the openings of the appliance.
There is a risk of electrocution if contact is made with voltage-
carrying connections.
► Do not connect the device to the same outlet with other
devices.

13 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

13.1 Safety information

Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.
38