Commissioning; Safety Information; Delivery Scope And Transport Inspection - CASO DESIGN Touch 2000 Mode D'emploi Original

Danger
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device
can also occur.
► Do not operate this device if it has a damaged cord or plug, if
it is not working properly or if it has been damaged or
dropped. If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
► Do not touch the appliance or the mains plug with wet hands.
► Do not immerse the appliance in water or other liquids, and
do not put it in the dishwasher.
► Do not insert objects into the openings of the appliance.
There is a risk of electrocution if contact is made with voltage-
carrying connections.
► Do not connect the device to the same outlet with other
devices.

13 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

13.1 Safety information

Warning
► Packaging materials may not be used for playing. There is a danger of suffocation.

13.2 Delivery scope and transport inspection

As a rule, the Touch 2000 is delivered with the following components:
 Induction cooktop Touch 2000
 Operating Instructions
37