Technical Information - Royal Sovereign RWD-1600B Guide D'utilisation

Masquer les pouces Voir aussi pour RWD-1600B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TECHNICAL INFORMATION

Voltage - Frequency
Heating power
Cooling power
Water Heating capacity
Water Cooling capacity
What to do in case of problems:
First turn off the water dispenser and disconnect it from the source of electricity.
Problem
Unit does not dispense hot and cold
water.
Unit does not dispense cold water.
Model
Possible Cause
Unit is unplugged.
Main power supply is off.
Damaged water dispenser
The water bottle cap is not attached
properly to the connector on the water
dispenser.
Over consumption of cold water in a short
time.
System Malfunction
The ventilation around the unit is insufficient.
The temperature of water in the water
bottle is too high. (When the bottle is
exposed to direct sunlight for a long time.)
2L/hour (.52 Gallon/hour)
5.0 L / hour (1.3 Gallon / hour)
Plug the power cord into an outlet.
Reestablish main power supply.
Replace the dispenser or send for service
Connect properly.
Wait a moment for the water to cool.
Contact Royal Sovereign customer service
Space the unit from the wall by more than 15 cm(5.9").
Place the water bottle in a cool location out of
direct sunlight.
8
RWD-1600B
115V 60Hz
500W
85W
Remedy

Publicité

Chapitres

Table des Matières
loading

Table des Matières