PARTS NAME
Drip Tray
Reset Button
Cabinet Door
UNPACKING THE WATER DISPENSER
1. Cut and remove the straps from the box. DO NOT turn the box upside down,or lay it on its side. The bottom of the box is separate from
the top section. Lift the box straight up and remove all packing material. Lift the water dispenser off the bottom of the box. Wipe it clean if
necessary.
2. Place the machine on a hard, flat surface. Make certain the unit is leveled.The unit should not be placed near to direct sunlight or other
sources of heat.
3. It is best to place the water dispenser in a well circulated area.
WARNING: The drain cap on the back of the unit may become loose during shipping. Fasten the drain cap tightly before you start to operate
the unit. If the drain cap is loose, the unit may leak and cause floor damage.
Hot Water Button and Child Safety Lock
Room Temperature Water Button
Cold Water Button
Indicator Lights
Water Bottle
Cap with Hose
Water Bottle
(Not included)
4
Cold Power Switch (Green)
Hot Power Switch (Red)
Condenser
Power Cold
Drain Plug